ENC-LRG-PSU-220-12V5A, Large Universal Enclosure

ENC-LRG-PSU-220-12V5A, Large Universal Enclosure

ENC-LRG-PSU-220-12V5A, is a power supply mounting box for Hanwha Access Control panels.

The ENC-LRG-PSU-220-12V5A is an advanced, high efficiency power supply, designed for use within Hanwha Access Control applications. Featuring a PSU with a regulated output of 13.8Vdc @ 5A, supplying continuous full rated current to load plus an additional 0.5A for charging a 12V 17Ah standby battery (max). The PSU offers 4 x 1.25A fused outputs and full Mains, battery and PSU monitoring as standard. The ‘Universal’ mesh backplate provides the installer simple & flexible mounting options for the range of Hanwha controllers.

Each ENC-LRG-PSU-220-12V5A Mounting box can be added with 2xHanwha access control panels or modules.

MAIN FEATURES

• Continuous full rated current to load (5A) 
  
• Universal mains input voltage 90-264Vac
• Lockable steel enclosure
• Volt free contact signaling mains failure (EPS)
• Volt free contact signaling output and battery faults (GEN)
• Universal enclosure with mesh backplate (fixings supplied)
• Installer safe design with all high voltage electronics fully shrouded
• Lid and removal from wall tamper detection 
• 4 x fused outputs with health LED’s
• LED status indication (Mains & Fault)
• Full electronic short circuit & overload protection
• Individual battery and output fuse protection
• Mains transient protection circuit
• Accommodates a 12Vdc 7Ah or 17Ah SLA battery
• Limited Lifetime Warranty