SHB-4300H, Heated & Fan-Cooled Box Camera Housing

SHB-4300H, Heated & Fan-Cooled Box Camera Housing

The SHB-4300H is an aluminum diecast housing that protects network or analog box cameras against harsh outdoor conditions. It is built for locations where temperature swings and humidity are both a challenge, such as warehouse loading doors, factory exterior walls, parking barriers, or cold storage entrances. With an operating range of -35°C to +50°C, it keeps the camera running through freezing winters and long summer heat exposure on steel-frame buildings alike.

The housing's core advantage is its built-in heater and fan unit. Without this pair, box cameras typically struggle with lens fogging in winter or image degradation from internal heat buildup in summer; the SHB-4300H handles both automatically.

• IP66 Rated Protection: Withstands rain, downpours, and high-pressure water jets, making it suitable for loading ramps, open parking entrances, and other spots directly exposed to weather.
• Automatic Heater (20W): Activates when internal temperature drops to 5°C ± 5°C, preventing lens fogging and mechanism freezing in front of cold storage units and north-facing walls.
• Automatic Fan (2W): Kicks in when internal temperature rises above 45°C ± 5°C, protecting camera electronics from overheating on south-facing walls and during summer months.
• Aluminum Diecast Body: More resistant to impact and UV degradation than plastic housings, holding up for years outdoors without color fading or cracking.
• 0°~360° Pan / 0°~90° Tilt Adjustment: Mounting angle can be fine-tuned on site even after cabling is complete, reducing installation time.
• 91x78x190 mm Interior Space: Large enough to fit most standard network and analog box cameras without needing extra adapters.

It suits loading and unloading doors in logistics warehouses, exterior walls and loading ramps in factories, parking and service entrances in retail chains, and perimeter walls or vehicle entry points in gated communities. In regions with sharp seasonal temperature shifts, the heater-fan combination reduces maintenance frequency and keeps image quality consistent year-round.

Running on a 24VAC supply with power consumption up to 25W, the housing integrates easily into existing power infrastructure. Contact the SECURITURK project team for a quote and to confirm compatibility with your specific box camera model.