SLA-T2480WA, 2MP Fixed Focal Lens Module

SLA-T2480WA, 2MP Fixed Focal Lens Module

SLA-T2480WA is a 2MP fixed focal lens module with a 2.4mm focal length, designed for modular camera systems. It connects to compatible Wisenet main units — including XNB-6002, PNM-9000QB, PNM-C20000QB, and XNB-A8004B — via an RJ12 connector. It is intended for projects that need to upgrade or replace the lens side of a camera without changing the main body, at locations requiring a wide field of view such as warehouse entrances, production lines, or parking ramps.

Key Features

• 138° horizontal field of view: Covers a wide area with a single module at busy but narrow passage points like warehouse entrance doors, reducing the need for additional cameras.
• 0.045 Lux minimum illumination: Produces usable footage even with very low light at poorly lit points such as factory yards or perimeter roads at night.
• IP66 and NEMA 4X rating: Keeps water and dust out of the module in outdoor conditions like loading ramps exposed to rain, dusty wind, or pressure washing.
• -30°C to +55°C operating range: Continues operating in areas with high temperature swings, such as cold storage entrances or open-air parking lots that freeze in winter.
• 8-meter cable length: Leaves enough distance between the main unit and the lens body, allowing the camera housing to be hidden while the lens is positioned exactly where the viewing angle requires.
• 101g weight, ø35mm body: Fits easily into tight mounting spots such as above checkout counters or narrow shelving gaps.

Logistics companies can use this module above shipping doors where a wide angle is needed, factories at points where an overview of the production line is required, and retail chains at tight mounting points above checkout counters. Site management teams often choose it for entry/exit ramps and parking gates, where both a wide field of view and outdoor durability are needed. The module has a fixed focus — no zoom or focus adjustment is possible — so the required field of view and distance should be determined before the project is finalized.

Contact the SECURITURK team to confirm compatibility with your main unit and get the right lens and body combination for your application; our technical team will prepare a quote tailored to your project.