SPO-6011, PoE Injector

SPO-6011, PoE Injector

The SPO-6011 is a 60W / 1.1A HPoE injector built for long cable runs or PTZ cameras that draw more power than a standard PoE switch port can deliver. Where a switch's PoE budget falls short or a camera sits far from the main network cabinet, this single unit handles both power and data delivery. The built-in SFP port lets a fiber link feed directly into the injector before reaching the camera.

• 60W / 1.1A HPoE output: Covers the power demand of motorized PTZ cameras with heaters or wipers, such as the XNP-C6403R, at gate entrances, parking lots, or wide perimeter coverage points where standard PoE isn't enough.
• Built-in SFP port: When the distance between camera and injector exceeds the 100 m limit of copper cabling, fiber can carry the signal in, removing the need for a separate media converter on large warehouse or plant sites.
• Wide 100~240VAC input: Runs without an external stabilizer even where mains voltage fluctuates.
• -40°C~+55°C operating range: Fits into outdoor enclosures or unheated technical rooms, including cold storage entrances and open-air cabinets.
• Polycarbonate housing, 480 g: Durable enough for long-term use in field cabinets or wall-mounted installations.

The SPO-6011 is typically deployed to power PTZ cameras at logistics warehouse entry points, long cable runs across factory floors, and perimeter cameras on managed sites — cases where a standalone power source is preferred over drawing extra load from the switch.

Compatibility is confirmed with the XNP-C6403R; for other models, please check via Toolbox. Contact the SECURITURK team for project support and a quote tailored to your setup.