TNO-C3082T, QVGA AI Tele Lens Thermal Camera

TNO-C3082T, QVGA AI Tele Lens Thermal Camera

The TNO-C3082T is a thermal network camera built around a 60mm tele lens, designed for long-range perimeter security. It is intended for sites where standard visible-light cameras fall short at night, in fog, or in smoke — port container yards, border lines, power plant fence lines, and the far edges of large logistics compounds. By converting heat differences into an image, its microbolometer sensor can pick out a moving person or vehicle in total darkness, dust, or haze.

Key Features

• Vehicle detection up to 531m, person detection up to 399m: Cover a long stretch of factory perimeter or border line with a single camera instead of installing multiple units.
• 2,127m detection, 266m identification range (Johnson's Criteria): Spot movement from far away, then clearly distinguish person from vehicle as it approaches.
• AI-based person/vehicle classification: Swaying branches, blowing debris, or stray animals won't trigger false alarms — your operator only reacts to genuine intrusions.
• -40°C to +60°C operating range, IP66/IP67, and IK10: Runs reliably in desert heat, extreme cold, and outdoor sites exposed to impact or vandalism.
• NEMA 4X and NEMA-TS2 certifications: Meets the demanding certification requirements of industrial plants with chemical exposure and traffic infrastructure projects.
• MIL-STD-810H military-grade durability: Tested against vibration, shock, and extreme climate conditions — a common requirement in critical infrastructure and border security projects.
• FIPS 140-3 Level 3 and CC EAL6+ security certifications: Data on the camera is protected at the hardware level, satisfying cybersecurity requirements in government and critical infrastructure tenders.

This type of thermal camera is used to monitor the perimeter of container storage yards at ports and customs terminals, transformer yard fencing at power plants, and the outer boundary of large open storage areas at logistics centers. In border security and military facility perimeter projects, the camera's 350° pan and 90° tilt range allow it to scan a wide area, while 8 polygonal motion detection zones let operators watch specific corridors or crossing points separately. On the recording side, it integrates with existing security infrastructure via microSD storage up to 1TB, an RS-485 serial interface, and 2 configurable alarm I/O ports.

Note that the USB video output is intended for preview and installation only — continuous monitoring requires a network connection and an NVR, a detail worth factoring into project planning. To determine the right thermal camera for your site's range, climate, and certification requirements, get in touch with the Securiturk project team for a consultation and quote.