Housings and Mounting Equipment
Please Ask
Brand: WISENET
Model: SBP-C35H
SBP-C35H, Pipe Converter Adapter
SBP-C35H is a pipe converter accessory that resolves thread mismatch issues encountered when mounting camera housings. It converts a 3/4" female PF connection into a 1.5" female PF connection, allowing Wisenet housing series to be fitted onto mounting infrastructures..
Please Ask
Brand: WISENET
Model: SBP-315HMW
SBP-315HMW, Hanging Ceiling Mount Adaptor
The SBP-315HMW is a hanging adaptor mount designed to install PNM-9084RQZ and PNM-9085RQZ series multi-sensor Wisenet cameras from the ceiling. It suits high-ceiling warehouse entrances, mall corridors, or wide production lines where the camera needs to hang..
Please Ask
Brand: WISENET
Model: SBP-300BW
SBP-300BW, Wall Mount Base
The SBP-300BW is a sub-bracket used to secure a Wisenet wall-mount adaptor firmly to a wall surface. It doesn't attach directly to the camera body — instead, it anchors the wall-mount adaptor itself, acting as the load-bearing base for the whole assembly. This makes it a p..
Please Ask
Brand: WISENET
Model: SBP-156KMW
SBP-156KMW, Corner Mount Bracket
SBP-156KMW is an aluminum corner mount bracket designed to install security cameras on wall corners. It allows camera placement on building corners, columns, or edges where a flat wall surface isn't available — a common requirement in warehouses, parking structures, ..
Please Ask
Brand: WISENET
Model: SBP-156LMW1
SBP-156LMW1, Telescopic Parapet Mount
The SBP-156LMW1 is a telescopic parapet mount designed for projects that need to install a camera housing on a rooftop railing or parapet wall. Made of aluminum, it handles outdoor exposure well and lets you extend a camera outward past the railing to cover wide..
Please Ask
Brand: WISENET
Model: SBP-156WA
SBP-156WA, PTZ Adaptor Bracket
The SBP-156WA is an aluminum converter bracket that lets compatible Hanwha Wisenet PTZ cameras mount onto third-party mounting equipment. It solves a common integration problem: pole brackets, wall consoles or corner mounts from other manufacturers often don't match Wi..
Please Ask
Brand: WISENET
Model: SBP-160C
SBP-160C, Mounting Hole Cover
The SBP-160C is a white polycarbonate cover designed to close off unused mounting holes on compatible camera housings. When a camera enclosure is installed on a wall or ceiling and not all mounting holes are used, the exposed holes look unfinished and can allow dust or ..
Please Ask
Brand: WISENET
Model: SBP-160HMW1
SBP-160HMW1, Hanging Mount Adaptor
SBP-160HMW1 is a hanging mount adaptor designed for ceiling installation of compatible Wisenet network cameras. It is intended for locations where the camera needs to hang directly from the ceiling rather than being wall-mounted — such as high-ceiling warehouse ent..
Please Ask
Brand: WISENET
Model: SBP-160TMW1
SBP-160TMW1, White Tilt Mount Bracket
SBP-160TMW1 is a white aluminum tilt mount bracket designed for XNF-9010RV and XNF-9013RV cameras. Once the camera is fixed to a ceiling or wall, this bracket allows the viewing angle to be adjusted independently of the mounting surface — useful at entrance door..
Please Ask
Brand: WISENET
Model: SBV-122WCW
SBV-122WCW, White Weather Cap
SBV-122WCW is an aluminum weather cap accessory built for Wisenet XNV-A9016R, XNV-A8016R, and XNV-A6016R camera models. On outdoor installations where these cameras sit exposed to direct sun, rain, or snow load, this cap shields the top of the housing and helps extend t..
Please Ask
Brand: WISENET
Model: SBV-136BW
SBV-136BW, White Back Box
The SBV-136BW is an aluminum back box accessory designed for QNV-6082R dome cameras. It is used to properly cover the cable connection point and mounting surface in projects requiring wall or ceiling installation. Its white finish blends in with light-colored ceilings or wa..
Please Ask
Brand: WISENET
Model: SBV-138TMW
SBV-138TMW, Tilt Mount Bracket
SBV-138TMW is an aluminum tilt mount bracket that allows dome network cameras to be installed at an angle on walls or ceilings. Instead of fixing the camera flat against a surface, this bracket lets installers angle the camera body toward the exact point they need to c..