WISENET
New
Please Ask
Brand: WISENET
Model: SBV-120WCW
SBV-120WCW, Weather Cap Accessory
The SBV-120WCW is a weather cap accessory designed for Wisenet QNV-6012R dome cameras. It is mounted over the camera to provide extra protection against sun exposure, rain, and snow. It is particularly useful for installations on sun-facing facades, open-air parking..
New
Please Ask
Brand: WISENET
Model: SBP-300CMTS
SBP-300CMTS, Ball Head Ceiling Mount
The SBP-300CMTS is an aluminum ceiling mount pole with a ball head, designed to position cameras precisely in high-ceiling warehouses, production lines, and shopping malls. The ball head lets installers adjust the camera angle directly on site, saving significant..
New
Please Ask
Brand: WISENET
Model: SBV-140TBW
SBV-140TBW, Tilt Mount Bracket
The SBV-140TBW is an aluminum tilt mount bracket designed to fine-tune the viewing angle of compatible Wisenet cameras after installation. Once the camera is fixed to a wall or mounting surface, this bracket allows a 20° tilt adjustment to point the camera exactly wher..
New
Please Ask
Brand: WISENET
Model: SBV-121WCW
SBV-121WCW, White Weather Cap
The SBV-121WCW is a white polycarbonate weather cap designed for QNV-C8013R and QNV-C8023R dome cameras. Mounted on top of the camera, it shields the lens and upper housing from rain, snow and direct sunlight, making it a practical addition for outdoor installations suc..
New
Please Ask
Brand: WISENET
Model: SHD-1128FPW
SHD-1128FPW, In-Ceiling Mount Housing
The SHD-1128FPW is an in-ceiling mount enclosure with an aluminum body and a polycarbonate top cover, built for projects that require concealed camera installation inside suspended ceilings. It suits offices, retail stores, bank branches, and hotel lobbies where..
New
Please Ask
Brand: WISENET
Model: SBS-165TM
SBS-165TM, Tilt Mount Bracket
The SBS-165TM is a tilt mount bracket designed specifically for the Wisenet TID-600R thermal camera series. It allows the camera to be installed on a wall or fixed surface at a specific angle, which is particularly useful at entry points or along perimeter lines where t..
New
Please Ask
Brand: WISENET
Model: SHD-1200FPW
SHD-1200FPW, In-Ceiling Flush Mount Housing
The SHD-1200FPW is a flush mounting accessory designed to install compatible QNV-C8011R, QNV-C8012 and QNV-C9011R dome cameras directly into ceiling tiles. The camera body sits flush with the ceiling surface instead of protruding downward, which makes it a..
New
Please Ask
Brand: WISENET
Model: SHD-1350FPW
SHD-1350FPW, In-Ceiling Mount Housing
The SHD-1350FPW is an in-ceiling mount accessory that lets XND-series dome cameras be recessed flush into a suspended ceiling. The camera body sits within the housing instead of protruding below the ceiling line, which suits retail stores, office corridors, and ..
New
Please Ask
Brand: WISENET
Model: SHD-1200FW
SHD-1200FW In-Ceiling Mount Accessory
The SHD-1200FW is an in-ceiling mount accessory that allows QNV-C8013R and QNV-C8023R dome cameras to be recessed into a suspended ceiling. The camera body is hidden inside the ceiling panel while only the dome remains visible below. It suits retail ceilings, of..
New
Please Ask
Brand: WISENET
Model: SHD-1198FW
SHD-1198FW, Flush Mount Bracket
The SHD-1198FW is an in-ceiling flush mount bracket designed for the QND-6082R and LND-6072R Wisenet camera models. It lets the camera sit recessed into a drop ceiling instead of protruding from a surface box, which matters in offices, retail stores, and shopping mall..
New
Please Ask
Brand: WISENET
Model: SBV-116B
SBV-116B, Back Mounting Box
SBV-116B is an aluminum back mounting box designed for the Wisenet XNV-6011 camera. It protects cable connections and the mounting point when the camera is fixed to a wall or ceiling, simplifying installation on site. It's a practical accessory for technical teams mountin..
New
Please Ask
Brand: WISENET
Model: SHD-1350P
SHD-1350P, In-Ceiling Retrofit Spacer
SHD-1350P is a retrofit spacer accessory designed for projects where an in-ceiling cutout is already in place and needs to work with SHD-3000F4/FW4 in-ceiling mounts. When a camera model change during a refresh project leaves the existing ceiling opening mismatc..