Accessories
Brand: WISENET
Model: SPP-C7400
SPP-C7400, Audio/Alarm Connection Cable
The SPP-C7400 is an original accessory cable used to wire the audio and alarm input/output connections of Wisenet dome cameras. It links the camera body to an alarm panel, audio source, or public address system, removing the need to improvise wiring when the r..
Brand: WISENET
Model: SPP-K004EP
SPP-K004EP, Cable with Push-Pull Connectors (Kit)
The SPP-K004EP is an RJ45 push-pull ruggedized connector cable kit built for specific Hanwha Vision outdoor network cameras. It's designed to keep the camera-to-cable connection sealed against wind, rain, and dust at exposed installation points. On p..
Brand: WISENET
Model: SPP-C1900
SPP-C1900, Micro HDMI Cable
The SPP-C1900 is a micro HDMI cable used to connect compatible Wisenet cameras directly to a monitor during installation or maintenance work. It has a male micro HDMI connector on the camera side and a female micro HDMI connector on the monitor side, so the camera feed c..
Brand: WISENET
Model: SPP-C12020P
SPP-C12020P, M12 Power Cable (2M)
SPP-C12020P is a 2-meter (6.6 ft) M12 power cable compatible with the Wisenet TNS-9040IBC, TNS-9050IBC and TNS-9060IBC series cameras. It is built to withstand dust, moisture and vibration in outdoor installations. It suits connection points that face constant expo..
Brand: WISENET
Model: SPO-6011
SPO-6011, PoE Injector
The SPO-6011 is a 60W / 1.1A HPoE injector built for long cable runs or PTZ cameras that draw more power than a standard PoE switch port can deliver. Where a switch's PoE budget falls short or a camera sits far from the main network cabinet, this single unit handles both power..
Brand: WISENET
Model: SPP-C12050P
SPP-C12050P, M12 Power Cable (5M)
SPP-C12050P is a 5-meter M12 power cable used to connect power to TNS-9040IBC, TNS-9050IBC and TNS-9060IBC series Wisenet cameras. It's the cable of choice when you need a sealed, mechanically durable power connection between a camera housing and a junction box in ..
Brand: WISENET
Model: SPP-C00410EP
SPP-C00410EP, Push-Pull Connector Camera Cable (10 m)
The SPP-C00410EP is a 10-meter ruggedized RJ45 push-pull cable built for connecting outdoor thermal and multi-sensor cameras. On sites like ports, power plants, and border installations, standard RJ45 cables can loosen over time due to vibration..
Brand: WISENET
Model: SPO-8315
SPO-8315, PoE Injector
The SPO-8315 is an 83W/1.5A HPoE injector built to power demanding PTZ and multi-sensor cameras that draw more current than a standard PoE port can supply. It steps in wherever long cable runs or high-consumption units such as motorized PTZ heads and heaters push beyond typica..
Brand: WISENET
Model: SPP-C12100P
SPP-C12100P, M12 Power Cable (10M)
SPP-C12100P is a 10-meter (32.8ft) M12 power cable compatible with Hanwha Vision TNS-9040IBC, TNS-9050IBC and TNS-9060IBC series cameras. It provides a single-piece connection between the camera and the power source in outdoor installations, eliminating the need f..
Brand: WISENET
Model: SPP-C08020E
SPP-C08020E, M12-RJ45 Ethernet Cable (2M)
The SPP-C08020E is a 2 meter (6.6ft) CAT6 X-coded Ethernet cable built to connect M12-equipped network cameras to standard RJ45 switching equipment. It's used on outdoor camera installations wherever the connection point at the camera end needs to stay seal..
Brand: WISENET
Model: SPP-C00402EP
SPP-C00402EP, Push-Pull Connector Camera Cable (2M)
The SPP-C00402EP is a 2-meter RJ45 cable with push-pull connectors, built for connecting outdoor-rated Wisenet cameras. It is designed for installation points exposed to moisture and dust — a port entrance, a warehouse exterior wall, an outdoor pa..
Brand: WISENET
Model: SPP-C00405EP
SPP-C00405EP, Push-Pull Connector Cable (5M)
The SPP-C00405EP is a 5-meter push-pull connector cable built for Wisenet TNP series camera domes. It is designed to solve one of the most common outdoor installation problems: moisture entering the connector area of pole-mounted or facade-mounted camera..
