SPI-BWM0, White LED Illumination Module

SPI-BWM0, White LED Illumination Module

SPI-BWM0 is a white LED illumination module designed for 3MP BCR cameras, working together with the TNS-7000M camera and SLM-5M12 lens. It reaches IP66/IP67 protection when the camera and front cover are properly assembled, making it suitable for exposed outdoor points such as highway toll booths, fuel stations, and parking barrier lanes where rain and dust are constant factors. It is built specifically to keep license plate images readable under low-light conditions.

Key Features

• 16 LEDs deliver a 6,500 K ± 10% color temperature close to daylight white, avoiding the yellowish color shift common in night-time plate captures.
• With a FWHM angle of 25° and a 10% angle of 46°, the beam stays narrow-to-medium and concentrates light onto the plate or ID zone instead of spreading it across a wide area — no light loss on a lane-width crossing point.
• IP66/IP67 protection, valid once the camera and front cover are assembled together, keeps the unit reliable at unsheltered outdoor points exposed to rain and humidity.
• An operating range of -40°C to +55°C means consistent performance both in harsh winter climates and hot summer conditions.
• 24 VDC ± 10% input with only 6.9 W power draw is low enough to integrate into an existing camera power line without adding meaningful load.
• At 200 grams and 101.2 x 53.8 x 78.2 mm, it mounts onto the camera body without adding significant weight or causing bracket compatibility issues.

This module is typically deployed at logistics warehouse vehicle gates, factory personnel and vehicle turnstiles, shopping mall parking areas, and gated entrances managed by site administrations to boost the night-time performance of license plate recognition cameras. Because it is matched to the TNS-7000M camera series and SLM-5M12 lens, it lets you upgrade the night readability of an existing BCR setup without investing in a separate lighting system.

Contact the SECURITURK team to confirm the exact camera and lens combination, the correct assembly steps to preserve the IP66/IP67 rating, and the right beam angle for your project, and request a quote.