SPI-BWW0, White LED Illumination Module for 6mm Lens

SPI-BWW0, White LED Illumination Module for 6mm Lens

SPI-BWW0 is a white LED illumination module built for 3MP BCR cameras, working together with the TNS-7000M camera and SLM-5M06 lens. It is used at points where plate and vehicle color must be captured clearly at night — highway checkpoints, parking barrier lanes, logistics warehouse entry ramps. Wherever monochrome infrared falls short and color information on the plate or vehicle body matters, this module fills the gap.

Key Features

• 16-LED white illumination array: With a 6,500 K ± 10% color temperature, it renders night captures close to daylight quality, making it easier for security operators to log vehicle color directly from recorded footage.
• IP66/IP67 protection rating: Once the camera and front cover are assembled together, the module withstands rain and dust at outdoor points such as open parking entrances, customs gates, or exposed loading ramps.
• -40°C to +55°C operating range: The same module performs consistently through cold winter nights in northern regions and hot summer days in the south, letting fleet or logistics operators standardize on one unit across sites with different climates.
• 60° FWHM beam angle: Produces a controlled light spread that covers the lane width without spilling over, so oncoming drivers are not dazzled while the beam still reaches the plate area effectively.
• 24 VDC ± 10% input, 6.9 W power draw: Low power consumption means it can run off the existing camera power line — PoE or DC — without requiring an additional power supply.
• 200 g weight, compact body (101.2 x 53.8 x 78.2 mm): Mounted onto the TNS-7000M camera, it adds negligible bulk on pole-top or barrier-arm installations with limited space.

Logistics centers wanting color and plate records at vehicle entry/exit points, parking operators, customs and border gates, and factory service gates with round-the-clock vehicle traffic are the typical users of this module. Site management companies also use it to replace monochrome IR lighting at visitor vehicle entrances, gaining clear color footage at night.

Our technical team can advise on the right camera-and-lens pairing, mounting orientation, and beam angle for your specific project. Contact SECURITURK for a detailed proposal and application guidance.