Network Camera Systems
Brand: WISENET
Model: SPP-C00410EP
SPP-C00410EP, Push-Pull Connector Camera Cable (10 m)
The SPP-C00410EP is a 10-meter ruggedized RJ45 push-pull cable built for connecting outdoor thermal and multi-sensor cameras. On sites like ports, power plants, and border installations, standard RJ45 cables can loosen over time due to vibration..
Brand: WISENET
Model: SPO-8315
SPO-8315, PoE Injector
The SPO-8315 is an 83W/1.5A HPoE injector built to power demanding PTZ and multi-sensor cameras that draw more current than a standard PoE port can supply. It steps in wherever long cable runs or high-consumption units such as motorized PTZ heads and heaters push beyond typica..
Brand: WISENET
Model: SPP-C12100P
SPP-C12100P, M12 Power Cable (10M)
SPP-C12100P is a 10-meter (32.8ft) M12 power cable compatible with Hanwha Vision TNS-9040IBC, TNS-9050IBC and TNS-9060IBC series cameras. It provides a single-piece connection between the camera and the power source in outdoor installations, eliminating the need f..
Brand: WISENET
Model: SPI-BWW0
SPI-BWW0, White LED Illumination Module for 6mm Lens
SPI-BWW0 is a white LED illumination module built for 3MP BCR cameras, working together with the TNS-7000M camera and SLM-5M06 lens. It is used at points where plate and vehicle color must be captured clearly at night — highway checkpoints, parki..
Brand: WISENET
Model: SPP-C08020E
SPP-C08020E, M12-RJ45 Ethernet Cable (2M)
The SPP-C08020E is a 2 meter (6.6ft) CAT6 X-coded Ethernet cable built to connect M12-equipped network cameras to standard RJ45 switching equipment. It's used on outdoor camera installations wherever the connection point at the camera end needs to stay seal..
Brand: WISENET
Model: SPP-C00402EP
SPP-C00402EP, Push-Pull Connector Camera Cable (2M)
The SPP-C00402EP is a 2-meter RJ45 cable with push-pull connectors, built for connecting outdoor-rated Wisenet cameras. It is designed for installation points exposed to moisture and dust — a port entrance, a warehouse exterior wall, an outdoor pa..
Brand: WISENET
Model: SPP-C00405EP
SPP-C00405EP, Push-Pull Connector Cable (5M)
The SPP-C00405EP is a 5-meter push-pull connector cable built for Wisenet TNP series camera domes. It is designed to solve one of the most common outdoor installation problems: moisture entering the connector area of pole-mounted or facade-mounted camera..
Brand: WISENET
Model: QNF-C9010
QNF-C9010, 12MP AI Fisheye Network Camera
The QNF-C9010 is a 12MP AI fisheye network camera with a 185° field of view, built for businesses that need to cover a wide room with a single ceiling-mounted device. It fits retail sales floors, bank branches, mall common areas, and warehouse entrance halls..
Brand: WISENET
Model: PND-A7082RV
PND-A7082RV, 4MP AI IK10 Modular Dome Network Camera
The PND-A7082RV is a 4MP AI dome camera built for indoor facilities that need both sharp image quality and true impact resistance. It fits well on production floors, warehouse corridors, mall common areas, or school entrance halls — locations wher..
Brand: WISENET
Model: SPI-BWM0
SPI-BWM0, White LED Illumination Module
SPI-BWM0 is a white LED illumination module designed for 3MP BCR cameras, working together with the TNS-7000M camera and SLM-5M12 lens. It reaches IP66/IP67 protection when the camera and front cover are properly assembled, making it suitable for exposed outd..
Brand: WISENET
Model: SPI-BRW0
SPI-BRW0, Red LED Illuminator Module
The SPI-BRW0 is a red LED illuminator module designed for the TNS-7000M license plate recognition (BCR) camera paired with the SLM-5M06 lens. It provides supplemental night-time lighting so that vehicle plates remain sharp and legible at highway toll booths, log..
Brand: WISENET
Model: SPI-BRN0
SPI-BRN0, Red LED Illumination Module
SPI-BRN0 is a red LED illumination module designed for TNS-7000M license plate recognition (ANPR/BCR) cameras. It works with SLM-5M16 and SLM-5M25 lenses and is used at parking entrances, toll gates, warehouse gates and site access points where nighttime plate ..
